Just like any other electronic appliance, washing machines are prone to a number of problems. Leaks, harsh shaking movements, strange noises, and issues powering on or dispensing detergent are all common symptoms of a faulty washing machine. Fortunately, most of these problems can be fixed with a few tools or troubleshooting methods.
A Note on Detergent
Many washing machine problems are the result of using too much detergent. This happens because your detergent creates too many suds, which end up spilling over. Be sure to monitor the amount of detergent going into your washing machine, as it could very well be causing the issue.
Water Leakages
If your washer is only leaking during the spin cycle, then the drain hose is to blame. This can be due to damage on the hose, foreign objects or an improper connection. The fill hose shouldn’t be on too tight, while the water inlet valve could be leaking or rusted.
Debris often builds up around the door seal, which could result in water seeping out. Over time, the drain pump can suffer from wear and tear, making it a possible culprit. Finally, your tub may have developed a hole from rubbing other components while off balance. If this is the case, you’ll have to call a professional to resolve the problem.
Ensuring that you’re trusting your money and appliances with a certified professional is important. Service Force offers fully trained, manufacturer-approved engineers with genuine replacement parts and a one-year guarantee. For all of your AEG kitchen appliance repair needs, head over to https://www.serviceforce.co.uk/aeg-repairs/.
Not Turning on
Your motor will automatically shut down if it gets too hot. If this happens frequently, there may be an overheating issue. Also, check to see if your lid switch is in working order and that your timer knob is properly aligned with the setting you’re choosing. There may also be a power issue. Be sure to check whether the outlet hasn’t tripped or overheated.
Improper Draining
Drainage problems can arise from a number of components. A clogged, damaged or improperly sealed drain hose may be to blame. Your pump may have locked up and seized due to a foreign object being stuck inside. In rare cases, the impeller blades could break. It’s likely that you’ll have to pick up a new pump.
Not Dispensing Detergent
The two most common issues that prevent an automatic detergent dispenser from working are using the incorrect product and blockages. The latter can be fixed by pouring a cup of warm distilled white vinegar and allowing the machine to run through a wash cycle.
Improperly Spinning
If your washer isn’t spinning properly, it could be due to it being unable to handle the size of your load, a faulty lid switch, a clogged drain pump or a worn out belt. Be sure to check your motor for any issues as the gear system could be causing agitation in the basket.
Excessive Noise
Depending on the noise you’re hearing, it could be one of three issues: A clicking sound could be due to a foreign object such as a coin clogged inside the drain. If you’re hearing a gurgling sound is likely due to an obstruction in the drain line. If it sounds more like a buzzing or humming noise, there may be something stuck inside the pump.
Conclusion
Most washing machine problems are the result of certain components being clogged, faulty or worn out. Being able to find and replace these components can save you from having to buy a completely new unit, so don’t hesitate to take a look inside or have a professional properly resolve the issue.